烟草科技2018，Vol.51Issue(4)：87-93,7.DOI:10.16135/j.issn1002-0861.2017.0409
基于ANSYS的烟组推手有限元分析和优化设计
Finite element analysis and optimized design of cigarette group pusher based on ANSYS
汤达伟 1吴旭 1方鑫1
作者信息
- 1. 中烟机械技术中心有限责任公司,上海浦东金桥出口加工区新金桥路1888号10号楼201206
- 折叠
摘要
Abstract
In order to improve the performance of cigarette group pusher in FOCKE FX hard packer, an ANSYS software was used for the finite element analysis of the pusher, CREO 3D model was introduced into the static analysis to obtain the stress and displacement strain values of the pusher. The major parameters influencing the pusher were determined through experimental design, and the pusher was optimized on the basis of the results of sensitivity analysis. The modified pusher was applied to FOCKE FX hard packer, the test results showed that: 1) On the premise of ensuring the mass of the pusher unchanged, its stress value and strain value decreased by 23.0% and 32.5%, respectively. 2) The deformation and wear of the pusher alleviated obviously, and the working life of the pusher prolonged from 14.3 to 20.5 months. This method provides a technical support for promoting the performance of cigarette packing machine.关键词
卷烟硬盒/包装机组/ANSYS软件/烟组推手/有限元分析/优化设计Key words
Hard packet for cigarette/Packer/ANSYS software/Cigarette group pusher/Finite element analysis/Optimized design分类
轻工纺织引用本文复制引用
汤达伟,吴旭,方鑫..基于ANSYS的烟组推手有限元分析和优化设计[J].烟草科技,2018,51(4):87-93,7.
