纳米氧化锌负载氧化石墨烯/环氧树脂复合材料性能研究OA北大核心CSCDCSTPCD
Properties of Graphene Oxide Loaded by Nano-ZnO/Epoxy Resin Composites
氧化石墨烯(GO)和纳米氧化锌(ZnO)具有优异的性能,但在环氧树脂中容易出现团聚现象,为解决这一问题,必须对其进行表面改性.以七水合硫酸锌为原料,将ZnO负载到GO 表面,通过FT-IR,XRD,SEM,EDS,TG和接触角测试,纳米ZnO均匀分散在GO基体上,并可以在不改变GO片层结构的条件下,改善GO 的团聚问题的同时降低GO 的亲水性.然后将ZnO负载GO与环氧树脂制备纳米ZnO 负载GO/环氧复合材料.结果表明:纳米ZnO 负载GO/环…查看全部>>
Graphene oxide and nano-ZnO have excellent performance,but are prone to agglomeration in epoxy.To solve this problem,surface modification needs to be carried out.Using zinc sulfate hep-tahydrate as the raw material,the zinc oxide was loaded on the surface of graphene oxide.Nano-ZnO was dispersed evenly on GO by FT-IR,XRD,SEM,EDS,TG and contact angle measurement,and the GO-sheet structure can be retained,while the agglomeration is avoided and the hydrophilici…查看全部>>
左银泽;陈亮;朱斌;高延敏
江苏科技大学 材料科学与工程学院,江苏 镇江212003江苏科技大学 材料科学与工程学院,江苏 镇江212003江苏科技大学 材料科学与工程学院,江苏 镇江212003江苏科技大学 材料科学与工程学院,江苏 镇江212003
化学化工
纳米氧化锌氧化石墨烯环氧树脂表面改性综合性能
nano-ZnOgraphene oxideepoxysurface-modificationoverall performance
《材料工程》 2018 (5)
渣金间辅助外电场电化学诱导焊缝氧化物冶金形核及其机理
22-28,7
国家自然科学基金(51075197)江苏省产学研前瞻(BY2013066-12)江苏科技大学研究生创新基金(YCX11S-24)
评论