中国电力2018，Vol.51Issue(5)：52-60,9.DOI:10.11930/j.issn.1004-9649.201711169
基于ANSYS的陕北换流站直流接地极地电位分布计算
Simulation Study on the DC Grounding Electrode Earth Potential Distribution of Northern Shaanxi Converter Station Based on ANSYS
摘要
Abstract
The distribution of earth surface potential needs to be calculated in UHVDC engineering planning and design.Based on the stratified earth resistivity data measured by magnetotelluric sounding method (MT method) from one China converter station project located in Daliushu Yan Village,Fugu County of Northern Shaanxi,a 6-layer earth soil stratification model is established.The potential distribution in the range of 100 km around the grounding electrode is analyzed by ANSYS under rated operating condition.The results show that the electric potential decreases rapidly in the range of 2 km around the DC grounding electrode,where the facilities of electric power,communications,railways and pipelines shall not be planned and built.The earth surface potential distribution of the built and planned substations and power plants in the area around the Northern Shaanxi converter station has been calculated,and the results can be used as a reference for the single pole operation debugging of Northern Shaanxi-Hubei UHVDC transmission project.关键词
UHVDC/直流接地极/ANSYS/仿真计算/地面电位分布Key words
UHVDC/DC grounding electrode/ANSYS/simulation &calculation/earth surface potential distribution分类
信息技术与安全科学引用本文复制引用
马成廉,王乐天,李波,李颖瑾,郝洪震,赵书健,国敢..基于ANSYS的陕北换流站直流接地极地电位分布计算[J].中国电力,2018,51(5):52-60,9.基金项目
国家自然科学基金资助项目(51577060,51677068).This work is supported by National Natural Science Foundation of China (No.51577060,No.51677068). （51577060,51677068）
