电焊机2018，Vol.48Issue(5)：114-117,4.DOI:10.7512/j.issn.1001-2303.2018.05.23
基于Hyper Mesh二次开发的对接接头焊接网格过渡方法
Welding mesh transition method of butt joint based on secondary development of hyper mesh
肖云 1张立平 2张红芳 3周鹏翔1
作者信息
- 1. 徐州徐工随车起重机有限公司,江苏徐州221004
- 2. 江苏徐州工程机械研究院,江苏徐州221004
- 3. 徐工集团工程机械有限公司高端工程机械智能制造国家重点实验室,江苏徐州221004
- 折叠
摘要
Abstract
Mesh transition,an ordinary method is utilized to realize the non-uniform grid division of weld area,HAZ and base metal zone in order to assure the precision and efficiency of finite element modeling in welding process,which is the major cause of more meshing time and bad efficiency.Based on the model of mesh transition,a butt-joint transition algorithm is compiled by the secondary development of Hyper Mesh software in the use of TCL/TK language and visual interface operation is also realized.The example shows that less pre-processing and higher division efficiency can be achieved by the means of secondary development.关键词
TCL/TK/焊接仿真/网格过渡/Hyper MeshKey words
TCL/TK/welding simulation/mesh transition/Hyper Mesh分类
矿业与冶金引用本文复制引用
肖云,张立平,张红芳,周鹏翔..基于Hyper Mesh二次开发的对接接头焊接网格过渡方法[J].电焊机,2018,48(5):114-117,4.
