金刚石与磨料磨具工程2018，Vol.38Issue(1)：32-36,40,6.DOI:10.13394/j.cnki.jgszz.2018.1.0005
Cu-Sn-Ti钎料的改性设计及性能分析
Modification design and performance analysis of Cu-Sn-Ti solder
摘要
Abstract
The pre-mixed filler metal is made by adding Fe,Al and Si elements in the Cu-Sn-Ti pre-alloy filler metal.17 kinds of proportioning schemes are determined by using the extreme vertex mixture design method with both upper and lower bounds.The mechanical properties of the solders were evaluated by the shear test.The interface of the matrix,the morphology of diamond and the interface of diamond were analyzed by SEM,EDS and Raman.The test results show that the shear strength of the pre-mixed filler metal decreases obviously when the mass fraction of Cu-Sn-Ti is below 95％,and the mass fraction of each addition should be under 2％.The premixed solder made of Fe,Al,Si with the same mass fraction of 1.7％ added in Cu-Sn-Ti have better comprehensive performance,the melting point and the flow ability are suitable,the abrasive grain edge is good,the diamond is not damaged and the dendritic compact TiC is formed on the interface of diamond.关键词
钎料改性/剪切强度/钎焊金刚石工具/界面分析Key words
modification of solder/shear strength/brazed diamond tool/interface analysis分类
矿业与冶金引用本文复制引用
高先哲,肖冰,管海军,肖博..Cu-Sn-Ti钎料的改性设计及性能分析[J].金刚石与磨料磨具工程,2018,38(1):32-36,40,6.基金项目
江苏省产学研前瞻性联合研究项目(BY2016003-15) （BY2016003-15）
江苏省产业技术研究院产业重大原创性技术创新项目(BO2015005). （BO2015005）
