铸造2018，Vol.67Issue(5)：420-423,4.
基于CAE分析的铝合金基座压铸工艺优化设计
Optimization Design of Die Casting Process for Aluminum Alloy Base Based on CAE Analysis
摘要
Abstract
During the development of die castings such as aluminum alloy base, the die casting process was simulated and optimized by the InteCAST software. The results show that the original scheme in which the molten aluminum was filled with one ingate easily causes air entrapment and entrapped slag at the bottom of the aluminum alloy base and in the top cylinder of the base. However, the optimization scheme in which an auxiliary ingate is added is more reasonable, and the above casting defects in the original scheme may be effectively avoided. In actual production, the qualified rate of castings is above 98％.关键词
华铸CAE/铝合金基座/压铸工艺/优化设计Key words
InteCAST/aluminum alloy base/die casting process/optimization design分类
矿业与冶金引用本文复制引用
李平,魏建华,李锋军,赵俊岩..基于CAE分析的铝合金基座压铸工艺优化设计[J].铸造,2018,67(5):420-423,4.基金项目
河南省高校基本科研业务费专项资金资助(NSFRF170502). （NSFRF170502）
