铸造2018，Vol.67Issue(5)：447-450,4.
铸钢轴承座铸造工艺设计与验证
Casting Process Design and Practical Production for Cast Steel Bearing Block
李伟华 1陈成 2张云博3
作者信息
- 1. 广州启帆工业机器人有限公司,广东广州511356
- 2. 国家知识产权局专利局专利审查协作广东中心,广东广州510530
- 3. 上海重型机器厂有限公司,上海200245
- 折叠
摘要
Abstract
To aim at overcoming the long development time of the traditional process design method for castings, the cast steel bearing block was taken as an example. By using CAE software Experto-ViewCast, the process design and solidification simulation were done for the cast steel bearing block, and its casting process scheme was determined quickly. The quality of the bearing block produced based on the process scheme was good. By using the casting CAE technology, the process design time of castings can be shortened, and the casting defects can be reduced.关键词
工艺设计/铸造CAE/轴承座Key words
casting process design/casting CAE/bearing block分类
矿业与冶金引用本文复制引用
李伟华,陈成,张云博..铸钢轴承座铸造工艺设计与验证[J].铸造,2018,67(5):447-450,4.
