医疗卫生装备2018，Vol.39Issue(6)：47-49,3.DOI:10.7687/j.issn1003-8868.2018.06.047
手术器械预处理器的研制
Development of surgical instrument preprocessor
程俊 1李静 1周刚1
作者信息
- 1. 陆军军医大学第三附属医院(野战外科研究所)医学工程科消毒供应中心,重庆 400042
- 折叠
摘要
Abstract
Object To design a surgical instrument preprocessor to facilitate the following cleaning.Methods The preprocessor was composed of a plastic shell, a liquid holding tank, an abluent adding mechanism, a charging pump, a set of temperature control device for heating and temperature calibration, truckles and a tank cover. The tigntness of the preprocessor was realized by a depressor under the tank cover, a spring connecting the depressor with the cover, a rope crossing through the cover and linked with the depressor as well as a ropewinder.Results The preprocessor eliminated easily the bloodstain and etc and prevented the biomembrane from coming into being.Conclusion The preprocessor behaves well in easy operation, automation and cleaning efficiency.关键词
手术器械/预处理器/消毒/清洗/灭菌Key words
surgical instruments/preprocessor/disinfection/cleaning/sterilization分类
医药卫生引用本文复制引用
程俊,李静,周刚..手术器械预处理器的研制[J].医疗卫生装备,2018,39(6):47-49,3.
