机械科学与技术2018，Vol.37Issue(6)：903-909,7.DOI:10.13433/j.cnki.1003-8728.20180054
X-Y平面联动的平面研磨轨迹分析与研磨实验
Experimental Study of X-Y Linkage Plane Lapping Track
摘要
Abstract
Some problems of coverage uniformity last for a long time in the traditional plane lapping,simulation and experiments are carried out to investigate the X-Y linkage plane lapping track,whose motion model is established.Effects of four parameters on the lapping trajectory are simulated,including initial diameter,the phase angle of initial point,speed ratio and X-Y linkage plane lapping track.Then,experiments on the plane lapping are conducted for a self-developed plane lapping machine tool.The flatness and roughness of its lapping surface are measured.The experimental results ensure the effectiveness of the lapping trajectory simulation method and show that the reasonable combination of lapping parameters is an essential factor for improving the surface quality.关键词
研磨加工/研磨轨迹仿真/X-Y联动的平面研磨Key words
plan lapping track/simulation/X-Y linkage plane lapping分类
机械制造引用本文复制引用
刘清,张广鹏,高智学,黄玉美..X-Y平面联动的平面研磨轨迹分析与研磨实验[J].机械科学与技术,2018,37(6):903-909,7.基金项目
陕西省机械制造装备重点实验室基金项目(14JS062)资助 （14JS062）
