| 注册
首页|期刊导航|华南农业大学学报|荔枝自动分级单体排序输送装置参数优化

荔枝自动分级单体排序输送装置参数优化

李嘉威 陈燕 王佳盛 刘威威 曾泽钦 邹湘军

华南农业大学学报2018,Vol.39Issue(4):93-99,7.
华南农业大学学报2018,Vol.39Issue(4):93-99,7.DOI:10.7671/j.issn.1001-411X.2018.04.015

荔枝自动分级单体排序输送装置参数优化

Parameter optimization of automatic grading and monomeric delivery device of litchi

李嘉威 1陈燕 1王佳盛 1刘威威 1曾泽钦 1邹湘军1

作者信息

  • 1. 华南农业大学 工程学院,广东 广州 510642
  • 折叠

摘要

Abstract

[Objective]To develop an automatic grading machine of litchi.[Method]An automatic monomeric delivery device was designed and a delivery experiment was performed.The influences of different working and structural parameters on the stuck frequency and cavity rate of litchi were analyzed.Regression and combined models were established.Influencing factors were optimized comprehensively.[Result]Both stuck frequency and cavity rate increased with the rotation speed of big turnable,the cycle length of small turnable and the feeding volume increasing.Both stuck frequency and cavity rate increased firstly and then decreased with the number of holes of big turnable increasing.The cavity rate also increased with the offset coefficient of amplitude of small turnable increasing.The major factor influencing the stuck frequency and cavity rate was the feeding volume,followed by the rotation speed of big turnable,then the offset coefficient of amplitude of small turnable.The optimial parameter combination from the combined regression model was better than those from the orthogonal experiment and the independent regression model.The optimial parameters of the delivery device were as follows: the rotation speed of big turnable was 7.35 r·min–1,the rotation amplitude of small turnable was 14.30 r·min–1,the cycle length of small turnable was 16.93 s,the offset coefficient of amplitude of small turnable was 0.33,the rotation motion of small turnable changed linearly,the feeding volume was 1.31 kg and the number of holes of big turnable was 10.Based on this combination,the stuck frequency was 0 and the cavity rate was 6%.[Conclusion]The results can provide references for the designation of automatic grading and monomeric delivery device of litchi.

关键词

荔枝/自动分级/单体排序输送装置/参数优化/卡果次数/空穴率

Key words

litchi/automatic grading/monomeric delivery device/parameter optimization/stuck frequency/cavity rate

分类

农业科技

引用本文复制引用

李嘉威,陈燕,王佳盛,刘威威,曾泽钦,邹湘军..荔枝自动分级单体排序输送装置参数优化[J].华南农业大学学报,2018,39(4):93-99,7.

基金项目

国家自然科学基金(31571568) (31571568)

广东省科技计划项目(2015A020209120,2015A020209111) (2015A020209120,2015A020209111)

华南农业大学学报

OA北大核心CSCDCSTPCD

1001-411X

访问量0
|
下载量0
段落导航相关论文