陕西科技大学学报2018，Vol.36Issue(4)：127-134,146,9.
基于单因素法对聚醚醚酮复合涂层的性能研究
The characteristics reserch of polyetheretherketone composite coatings based on single factor method
摘要
Abstract
Polyetheretherketone(PEEK)is widely used in the preparation of composite coat-ings because of its corrosion resistance,self-lubrication and high temperature resistance.Nowadays,there is no optimum process scheme for the preparation of PEEK/PTFE/graphite composite coatings.In response to this problem,the single-factor method was adopted in this experiment under different pressing pressures(9 t,15 t,21 t,27 t),different sintering tem-peratures(360 ℃,370 ℃,380 ℃,390 ℃)and different crystallization times(Polyethere-therketone composite coatings were prepared at 10 min,30 min,50 min,and 70 min.The crystallinity,hardness and friction coefficient of the coatings were studied.It was found that the composite coating had the best mechanical properties under the conditions of compaction pressure of 21 t,sintering temperature of 390 ℃ and crystallization time of 70 min.关键词
聚醚醚酮/结晶度/硬度/摩擦因数Key words
PEEK/crystallinity/hardness/the coefficient of friction分类
化学化工引用本文复制引用
杨立军,张博,王柯欣,张创,刘欢..基于单因素法对聚醚醚酮复合涂层的性能研究[J].陕西科技大学学报,2018,36(4):127-134,146,9.基金项目
国家自然科学基金项目(50972086) （50972086）
