| 注册
首页|期刊导航|中国舰船研究|基于物质点法的弹体侵彻靶板破甲特性数值模拟

基于物质点法的弹体侵彻靶板破甲特性数值模拟

秦业志 姚熊亮 王志凯 王莹

中国舰船研究2018,Vol.13Issue(3):118-124,7.
中国舰船研究2018,Vol.13Issue(3):118-124,7.DOI:10.19693/j.issn.1673-3185.01173

基于物质点法的弹体侵彻靶板破甲特性数值模拟

Numerical simulation of projectile penetration into steel plate based on material point method

秦业志 1姚熊亮 1王志凯 1王莹1

作者信息

  • 1. 哈尔滨工程大学 船舶工程学院,黑龙江哈尔滨150001
  • 折叠

摘要

Abstract

[Objectives] The FE method cannot accurately simulate crevasse patterns and the crevasse forming process when dealing with a projectile penetrating into a ship's plate because of mesh distortion. [Methods] To this end,this paper establishes a numerical simulation model of a projectile's penetrating shell structure based on the Material Point Method(MPM)and successfully simulates the failure process of crevasses. A comparison is made between the simulation results and the experimental results,showing that the MPM simulation results match the experimental results more closely, thus verifying the effectiveness of researching the crevasse failure process in the context of a projectile penetrating a ship's plate and providing a new approach to researching missiles penetrating a ship's shell plate. On the basis of the simulation model,simulations are made of a projectile penetrating 5 mm and 10 mm target plates with various velocities.[Results] The findings indicate that the crevasse size and plastic deformation area of the target plates are basically unchanged,and the crevasse size is slightly larger than the diameter of the projectile,with a'washing crevasse'fracture mode. The target plate exhibits a plugging failure mode when hemispherical head projectiles penetrate such as the hull of shup at low,medium and high speed,and the speed has little influence on the size of the crevasses in the target plates while having a great influence on the height of the bump at the crevasse.[Conclusions] The results of this study can provide useful references for the protection design of ship structures.

关键词

弹体/抗侵彻/靶板/数值模拟/物质点法

Key words

projectile/anti-penetration/target plate/numerical simulation/Material Point Method(MPM)

分类

交通工程

引用本文复制引用

秦业志,姚熊亮,王志凯,王莹..基于物质点法的弹体侵彻靶板破甲特性数值模拟[J].中国舰船研究,2018,13(3):118-124,7.

基金项目

国家自然科学基金资助项目(11602069,51779056) (11602069,51779056)

中国博士后科学基金第61批面上基金资助项目(2017M611359) (2017M611359)

黑龙江省博士后基金资助项目(LBH-Z16041) (LBH-Z16041)

中国舰船研究

OA北大核心CSCDCSTPCD

1673-3185

访问量0
|
下载量0
段落导航相关论文