铸造2018，Vol.67Issue(6)：502-506,5.
Sb、Te变质对ZL101合金组织和性能的影响
Effects of Sb and Te Modification on Microstructure and Properties of ZL101 Alloy
胡中潮 1于慧 2崔元胜 3孟另柱1
作者信息
- 1. 天津那诺机械制造有限公司,天津 300457
- 2. 辽宁工程技术大学,辽宁阜新 123000
- 3. 空军驻山东地区军事代表室,山东济南250023
- 折叠
摘要
Abstract
Microstructure and mechanical properties of ZL101 alloys treated by Sb and Te modification were studied by optical microscope and tensile testing. The results show that the coarse plate-shaped eutectic silicon particles become smaller after Sb modification. And for the sand mold with slow cooling rate, the modification effects is general. The modification with 0.1wt% Sb addition can achieve the best effect and makes the eutectic silicon thinner along the width. When Te modification is less than 0.1wt%, the effect of modification is enhanced with the increase of addition, adding 0.1wt% Te is better than others. The modification of eutectic silicon is shorter in the direction of length and better for sand mold with slower cooling rate. But the addition of Te alone is not sufficient. The addition of 0.05wt.%Te+0.05wt.%Sb when using composite modification of Sb and Te can achieve the best modification effect, and the modification has a long-lasting effect, which is still excellent after holding for 2 h. After the composite modification, the tensile strength, yield strength and elongation have increased by 10.8%, 6.2% and 70.2%, respectively.关键词
ZL101合金/Sb变质/Te变质/组织/性能Key words
ZL101 alloy/Sb modification/Te modification/microstructure/properties分类
矿业与冶金引用本文复制引用
胡中潮,于慧,崔元胜,孟另柱..Sb、Te变质对ZL101合金组织和性能的影响[J].铸造,2018,67(6):502-506,5.
