中空孔VCR法深孔掏槽爆破机理分析及参数计算OA
Analysis of deep hole cutting blasting mechanism in hollow hole VCR mining method and calculation of parameters
为提高采场深孔掏槽爆破效率, 改善VCR法深孔掏槽爆破效果, 将VCR法掏槽爆破与中空孔直眼掏槽爆破相结合, 首次尝试对中空孔VCR法深孔掏槽爆破进行机理分析, 并在此基础上对其炮孔间距、装药长度、堵塞长度等掏槽参数进行了推导计算, 得到其装药长度应为孔底堵塞长度的34倍.研究认为, 在VCR法深孔掏槽爆破中增加中空孔, 能够增加炮孔间距, 增大爆腔体积, 有效改善爆破效果.现场工程试验结果表明, 爆破效果理想, 块度均匀, 单次掏槽高度约5m,…查看全部>>
In order to improve the blasting efficiency of deep hole cutting in the stope and improve the blasting effect of deep hole VCR method cutting, the VCR method was combined with the blasting of hollow hole blasting, and the first attempt was made to deep hole cutting based on the analysis, the parameters such as the distance between the hole, the length of the charge and the length of the plug are deduced. The length of the charge should be 34 times of the len…查看全部>>
黄小彬;黄慎;韩雪靖;李斌
福州大学 紫金矿业学院,福建 福州 350116福州大学 爆炸技术研究所,福建 福州 350116福州大学 紫金矿业学院,福建 福州 350116福州大学 爆炸技术研究所,福建 福州 350116
矿业与冶金
VCR法深孔掏槽爆破掏槽爆破机理掏槽爆破参数
VCR methoddeep hole cutting blastingcutting blasting mechanismcutting blasting parameters
《化工矿物与加工》 2018 (5)
40-44,52,6
福建省自然科学基金资助项目(2011J01310)紫金山金铜矿采场回采爆破控制技术研究(01051602).
评论