| 注册
首页|期刊导航|铸造技术|Ca含量对Mg-Al-Zn合金组织及腐蚀性能的影响

Ca含量对Mg-Al-Zn合金组织及腐蚀性能的影响

李会新 姬莉 高黎黎 李媛媛 张稼轩 卢东华 岳学庆

铸造技术2018,Vol.39Issue(5):988-991,4.
铸造技术2018,Vol.39Issue(5):988-991,4.DOI:10.16410/j.issn1000-8365.2018.05.011

Ca含量对Mg-Al-Zn合金组织及腐蚀性能的影响

Effect of Ca Content on Microstructure and Corrosion Resistance of Mg-Al-Zn Alloy

李会新 1姬莉 1高黎黎 2李媛媛 1张稼轩 1卢东华 1岳学庆2

作者信息

  • 1. 秦皇岛职业技术学院 机电工程系,河北 秦皇岛 066100
  • 2. 秦皇岛职业技术学院 教务科研处,河北 秦皇岛 066100
  • 折叠

摘要

Abstract

Magnesium alloys Mg-Al-Zn alloyed with different Ca content of 0, 0.3%, 0.6%, 0.9%, 1.2% and 1.5% were prepared by gravity casting. The microstructures of alloys were observed by optical microscope (OM) and scanning electron microscopy (SEM), and the corrosion resistances of alloys were investigated by electrochemical analysis and static weight losing method. The results show that the main corrosion mechanism of alloys is galvanic corrosion between α-Mg and second phase. The corrosion resistance of alloys increases gradually with increasing Ca content up to 0.9% and then decreases sharply. The phenomenon is related to the morphology change of second phase in the alloys with different Ca contents.

关键词

镁合金//腐蚀/微观组织

Key words

magnesium alloy/calcium/corrosion/microstructure

分类

矿业与冶金

引用本文复制引用

李会新,姬莉,高黎黎,李媛媛,张稼轩,卢东华,岳学庆..Ca含量对Mg-Al-Zn合金组织及腐蚀性能的影响[J].铸造技术,2018,39(5):988-991,4.

基金项目

河北省高等学校科技研究资助项目(Z2017159) (Z2017159)

铸造技术

1000-8365

访问量0
|
下载量0
段落导航相关论文