铸造技术2018，Vol.39Issue(6)：1291-1293,1297,4.DOI:10.16410/j.issn1000-8365.2018.06.038
2Cr13不锈钢铸坯表面质量优化研究
Study on the Surface Quality Optimization of 2Cr13 Stainless Steel Billets
陈柯勋 1张雪英2
作者信息
- 1. 太原理工大学 信息与计算机学院,山西 太原 030600
- 2. 北京强度环境研究所,北京 100076
- 折叠
摘要
Abstract
Due to the properties of 2 Cr13 special steel, the surface quality problems such as depressions were easy to occur in the process of continuous casting.Aiming at the problem, the surface quality of 2 Cr13 casting billets were optimized by testing the slag parameters and the cooling water strength of the crystallizer.The results show that it is beneficial to eliminate the surface depression of 2 Cr13 martensitic stainless steel billets by lowering the viscosity of mold slag and improving the alkalinity.Under certain conditions, reducing the water flow rate of crystallizer can greatly reduce the generation of deep depression.Optimization of the slag parameters and the water cooling strength of crystallizer can reduce the average surface grinding rate of 2 Cr13 billets.关键词
2Cr13/结晶器保护渣/结晶器冷却/表面质量/凹陷Key words
2Cr13/mold protects the slag/crystallizer mold cooling/surface quality/depression分类
冶金工业引用本文复制引用
陈柯勋,张雪英..2Cr13不锈钢铸坯表面质量优化研究[J].铸造技术,2018,39(6):1291-1293,1297,4.
