| 注册
首页|期刊导航|广东电力|10kV交流电力电缆冷缩式中间接头电场仿真

10kV交流电力电缆冷缩式中间接头电场仿真

王劲 覃煜 张行 王仲

广东电力2018,Vol.31Issue(12):127-133,7.
广东电力2018,Vol.31Issue(12):127-133,7.DOI:10.3969/j.issn.1007-290X.2018.012.018

10kV交流电力电缆冷缩式中间接头电场仿真

Simulation on Electric Field of Cold Shrinkable Intermediate Connector of 10kV AC Power Cable

王劲 1覃煜 1张行 1王仲2

作者信息

  • 1. 广州供电局有限公司电力试验研究院, 广东 广州 510410
  • 2. 四川大学 电气信息学院, 四川 成都 610065
  • 折叠

摘要

Abstract

Electric performance of the intermediate connector of power cable may affect safe and stable operation of the cable, therefore, this paper takes the cold shrinkable intermediate connector of 10 k V AC three-core pow er cable as the study object and uses the finite element simulation method to establish a simplified 3D single-core model in SolidWorks and ANSYS softw are.It makes simulation study on distribution law s of electric field of the cold shrinkable intermediate connector under different states such as spiked flaw s on the surface of crimping pipe, scratches at different locations on the XPLE insulation surface and insulation shield surface.It also studies influence of height of spiked flaw s, depth of scratches and medium in scratches on electric field intensity.Research results indicate electric field intensity w ill increase after introducing defects and w ith increase of sizes of spiked flaw s and scratches and changes of scratch locations, variation trends of electric field intensity are different as mediums in defects are respectively air and w ater.On the w hole, electric field intensity is rising or basically unchanged.

关键词

10kV交流电力电缆/冷缩式电力电缆中间接头/有限元/电场仿真/典型缺陷

Key words

10kV AC power cable/cold shrinkable intermediate connector/finite element/electric field simulation/typical defect

分类

通用工业技术

引用本文复制引用

王劲,覃煜,张行,王仲..10kV交流电力电缆冷缩式中间接头电场仿真[J].广东电力,2018,31(12):127-133,7.

基金项目

广州供电局有限公司科技项目 (GZGD20170303240077) (GZGD20170303240077)

广东电力

OACSTPCD

1007-290X

访问量0
|
下载量0
段落导航相关论文