空气动力学学报2019，Vol.37Issue(2)：310-319,328,11.DOI:10.7638/kqdlxxb-2018.0207
基于S-A与SSG/LRR-ω两种湍流模型的CHN-T1 标模计算与分析
Numerical inverstigation and discussion on CHN-T1 benchmark model using Spalart-Allmaras model and SSG/LRR-ω model
摘要
Abstract
By solving Reynolds averaged Navier-Stokes equations,all cases of the CHN-T1 benchmark aircraft configuration from the first AeCW-1 conference were investigated in detail using Spalart-Allmaras model and Reynolds stress model,respectively.The behaviors of the two models on this test case were specifically discussed and investigated,in order to evaluate the ability regarding approach the grid convergence,the accuracy for the prediction of the aircraft operating near the buffeting envelop,as well as the sensitivity of the two models to Reynolds number.After comparing the computations with the experimental data,the main conclusions are organized as the following:Both turbulence models can achieve final grid convergence,and the RSM can faster grid convergence than the S-A model.For the cases with high angles of attack, where shock-induced separation can occur,the computations using the two models significantly differ to each other.The tail-supporting string of the CHN-T1 model has a great impact on the pressure distribution of the horizontal tail.The present of the tail-supporting string induces a complex turbulence separation on the tail of the fuselage,which is difficult to be predicted accurately.The computations with the static aeroelastic deformation yield poor agreement of the moment coefficient with the experimental data, especially for the RSM model.For cases operating at higher Reynolds number,the results predicted by the two models are closer.关键词
CHN-T1 标模/S-A模型/雷诺应力模型/尾撑效应/静气弹效应Key words
CHN-T1 benchmark model/Spalart-Allmaras model/Reynolds stress model/the tail-supporting string effect/static aeroelasticity effect分类
航空航天引用本文复制引用
聂胜阳,王垠,刘志强,金朋,焦瑾..基于S-A与SSG/LRR-ω两种湍流模型的CHN-T1 标模计算与分析[J].空气动力学学报,2019,37(2):310-319,328,11.基金项目
国家重点研发计划(2016YFB0200700) （2016YFB0200700）
