红外与毫米波学报2019，Vol.38Issue(1)：15-20,6.DOI:10.11972/j.issn.1001-9014.2019.01.003
用于MW级回旋管的TE34,10模圆柱高频腔体设计
Design of a TE34, 10 mode cylindrical cavity for MW level gyrotron
马国武 1胡林林 1卓婷婷 1孙迪敏 1黄银虎 1陈洪斌 1孟凡宝1
作者信息
- 1. 中国工程物理研究院 应用电子学研究所,四川 绵阳 621900
- 折叠
摘要
Abstract
A cylindrical gyrotron cavity is designed and optimized with a high order mode TE34, 10-to deliver an output power of megawatts level at 140 GHz. Analysis on mode competition indicates that the two adjacent modes TE33, 10-and TE31, 11 +involve in competition and cause significant decreasing of output power of TE34, 10-. To suppress the competition hysteresis loops of TE31, 11 +and TE33, 10-with TE34, 10-are calculated, which indicates TE34, 10-can inhibit growth of the other two modes with decreasing magnetic field from its lowefficiency single mode oscillation zone, while it turned out just the opposite with increasing magnetic field due to the earlier oscillation of the competitors. Based on the results, a multimode time-dependent calculation including 42 modes is carried out with magnetic field dropping from 5. 59 T to 5. 51 T, the results showthat mode competition is successfully suppressed, the operation mode TE34, 10-realizes stable single mode oscillation with an output power of 0. 96 MW and an electron efficiency of 36. 7％ at 140 GHz.关键词
回旋管/圆柱腔/模式竞争Key words
gyrotron/cylindrical cavities/mode competition分类
数理科学引用本文复制引用
马国武,胡林林,卓婷婷,孙迪敏,黄银虎,陈洪斌,孟凡宝..用于MW级回旋管的TE34,10模圆柱高频腔体设计[J].红外与毫米波学报,2019,38(1):15-20,6.
