电气传动2019，Vol.49Issue(7)：60-63,4.DOI:10.19457/j.1001-2095.dqcd19917
基于无差拍控制的中频电阻点焊逆变器的研究
Research on Mid-frequency Resistance Spot Welding Inverter Based on Deadbeat Control
孙枫 1王艳 2李茂3
作者信息
- 1. 天威新能源系统工程(北京)有限公司,北京 100000
- 2. 中国地质大学长城学院工程技术学院,河北 保定 071000
- 3. 中国地质大学长城学院现代教育技术中心,河北 保定 071000
- 折叠
摘要
Abstract
According to the traditional resistance welding inverter power source has some shortcomings such as bad stability of control system,slower current response speed,and so on. A method of deadbeat control based on DSP was put forward. Deadbeat control has characteristics of fast dynamic response,high control accuracy,low harmonic distortion rate,etc. In the resistance spot welding inverter power source of constant current control,with deadbeat control,the circuit is simple and easy to implement,and it can quickly track the change of the load current. On the basis of theoretical study,used the software of Matlab/Simulink to simulate,the correctness of the theoretical research of the proposed control strategy was verified. Finally,a test prototype was designed and tested on the prototype,and the experimental results show that the resistance spot welding has good adjusting performance and excellent welding performance.关键词
无差拍控制/恒电流控制/逆变焊机/点焊逆变器Key words
deadbeat control/constant current control/inverse welder/spot welding inverter分类
信息技术与安全科学引用本文复制引用
孙枫,王艳,李茂..基于无差拍控制的中频电阻点焊逆变器的研究[J].电气传动,2019,49(7):60-63,4.
