烟草科技2019，Vol.52Issue(8)：89-94,100,7.
YJ17卷烟机供丝系统的优化改进
Optimization and modification of cut tobacco feeding system in YJ17 cigarette maker
高迪 1郭继文 1孙超 1张保永 1丁连明 1甘怀增 1方杰1
作者信息
- 1. 安徽中烟工业有限责任公司蚌埠卷烟厂,安徽省蚌埠市禹会区长丰路258号 233000
- 折叠
摘要
Abstract
In order to reduce tobacco breakage and stabilize tobacco feeding, the cut tobacco feeder in YJ17 cigarette maker was modified. The bolts on the accelerator roller were replaced by blades to accelerate tobacco in a gentle way. The rotation speed of picker roller was reduced to minimize tobacco breakage. The modified feeder was tested in Bengbu Cigarette Factory on cigarettes of brand"Huang Shan (New Wanyan)". The results showed that the proportion of long strand increased by 3.9 percentage points, and that of short strand decreased by 0.7 percentage points, the filling value of cut tobacco raised by 0.05 cm3/g, the percentage of loose end cigarette decreased by 0.09 percentage points, the rejection rate of cigarettes with weight beyond tolerance (670± 70 mg) reduced by 24%, and the standard deviation of cigarette weight lowered by about 2 mg. This technology provides a support for the stabilization of tobacco feeding in cigarette maker.关键词
YJ17卷烟机/供丝系统/烟丝/抛丝辊/弹丝辘Key words
YJ17 cigarette maker/Cut tobacco feeder/Cut tobacco/Accelerator roller/Picker roller分类
轻工纺织引用本文复制引用
高迪,郭继文,孙超,张保永,丁连明,甘怀增,方杰..YJ17卷烟机供丝系统的优化改进[J].烟草科技,2019,52(8):89-94,100,7.
