烟草科技2019，Vol.52Issue(1)：98-102,5.
基于凸轮滑块结构的细支爆珠滤棒植珠装置
Capsule planting device for slim filter rod based on cam-slider mechanism
摘要
Abstract
To plant capsules into slim filter rods rapidly and accurately, a capsule planting device was designed on the basis of cam-slider mechanism. Through analyzing the movement of slider, cam profile was calculated, and the pressure angle was checked. A comparison test was carried out on a YL22 filter rod maker between cam-slider type and JK-4AE type capsule planting devices. The results showed that: 1) Within the running speed of 60-100 m/min, the capsule missing rate of filter rods manufactured by cam-slider type device was ≤0.01‰, which was significantly lower than that by JK-4AE type device. 2) The maximum running speed of filter rod maker increased from 80 to 150 m/min, and the production efficiency was promoted. This method provides a technical support for improving the quality of capsuled slim filter rod.关键词
成型机组/细支烟/爆珠/滤棒/凸轮滑块/缺珠率Key words
Filter rod maker/ Slim cigarette/ Breakable capsule/ Filter rod/ Cam-slider/ Capsule missing rate分类
轻工纺织引用本文复制引用
..基于凸轮滑块结构的细支爆珠滤棒植珠装置[J].烟草科技,2019,52(1):98-102,5.基金项目
湖北中烟工业有限责任公司科技项目"双爆珠滤棒爆珠添加装置研究与应用"(2016A073JL02). （2016A073JL02）
