烟草科技2019，Vol.52Issue(1)：103-106,4.
带式输送机旋转轴方向检测装置设计
Design of direction detector for rotating shaft in belt conveyor
摘要
Abstract
In order to avoid direction error of rotating shaft during the running of belt conveyor due to equipment failure or operational errors, a direction detector was designed. On the basis of the relative motion of gear pair and one-way clutch, the detection of the rotating direction of a shaft was transformed into the detection of signal from proximity switch, and determined by a PLC controller. The device was tested on a two-way belt conveyor, the results showed that this device could monitor the running state of belt conveyor with the accuracy of 100%, correct the running status of processing line timely. The maintenance response time was shortened by 5 min. This device provides a technical support for promoting the process control level of tobacco primary processing.关键词
制丝生产线/带式输送机/旋转轴/方向检测/齿轮/单向离合器/接近开关Key words
Tobacco primary processing line/ Belt conveyor/ Rotating shaft/ Direction detection/ Gear/ One-way clutch/ Proximity switch分类
轻工纺织引用本文复制引用
..带式输送机旋转轴方向检测装置设计[J].烟草科技,2019,52(1):103-106,4.
