烟草科技2019，Vol.52Issue(4)：85-93,9.
基于热重的卷烟纸质量稳定性研究
Study on quality consistency of cigarette paper based on TGA technology
摘要
Abstract
In order to study the quality consistency of cigarette paper, the DTG curves of cigarette paper and cut filler of a certain cigarette brand were analyzed for 35 consecutive months. NRMSE (Normalized root mean square error) was introduced to calculate the difference of pyrolysis peak (400-625 K) and combustion peak (625-800 K) in DTG curves of different cigarette samples, and the quality consistency of cigarette paper was evaluated by combining NRMSE with the fluctuation of tar and CO deliveries. The results showed that: 1) The fluctuation of tar and CO deliveries of cigarette was mainly caused by the quality fluctuation of cigarette paper. 2) When the NRMSE of cigarette paper DTG curve was less than 10% in the pyrolysis peak and less than 20% in the combustion peak, the corresponding tar and CO deliveries had the least difference value of ≤ 0.5 mg. 3) When the NRMSE of cigarette paper DTG curve was higher than 10% in the pyrolysis peak and higher than 20% in the combustion peak, the deliveries of tar and CO were significantly affected by the NRMSE of combustion peak. 4) It was possible that the cigarette paper of similar specifications (grammage, permeability and contents of additive, Na, K and Ca) produced quite different DTG curves and varying tar and CO deliveries. 5) Predicting tar and CO deliveries by pairing DTG curves of cigarette paper in a given month with the DTG curve of the standard cigarette paper, the relative deviation of prediction was less than 5%.关键词
卷烟纸/烟丝/热重分析/热解燃烧差异度/标准均方根误差/焦油/COKey words
Cigarette paper/Cut filler/TGA/Pyrolysis and combustion difference/NRMSE/Tar/CO分类
轻工纺织引用本文复制引用
李巧灵,蔡国华,许寒春,钟洪祥,张国强,黄朝章,刘秀彩,郑泉兴,林艳,叶仲力,郑捷琼,徐建荣..基于热重的卷烟纸质量稳定性研究[J].烟草科技,2019,52(4):85-93,9.基金项目
福建中烟工业有限责任公司科技项目"基于热重分析的卷烟质量稳定性研究"(FJZYJH201609). （FJZYJH201609）
