烟草科技2019，Vol.52Issue(5)：100-104,5.
PROTOS2-2卷接机组烟条分离轮的改进设计
Modification of tobacco rod separating drum in PROTOS 2-2 cigarette maker
杜坤艳 1康瑛 1孙斌 1程卫民 1张颖靓1
作者信息
- 1. 中烟机械技术中心有限责任公司,上海市浦东新区金海路1000号 201206
- 折叠
摘要
Abstract
In order to make filter length change quickly in PROTOS2-2 cigarette maker, the tobacco rod separating drum was modified while keeping the structure of the maker unchanged. Instead of the cam mechanism, the slide blocks were driven by the swing plates symmetrically installed inside the separating drum, and the separating stroke could be adjusted rapidly without changing parts. The modified separating drum was tested on a ZJ116A filter cigarette maker, the results showed that the maximum separating stroke reached 83.6 mm. At the production speed of 14 000 cigarette/min, the modified separating drum ran stably, and no wrinkled or squeezed cigarette was found. This method provides a technical support for promoting the intellectualization of cigarette makers.关键词
PROTOS2-2卷接机组/烟条分离轮/分离行程/滤嘴长度/摆动盘Key words
PROTOS2-2 cigarette maker/Tobacco rod separating drum/Separating stroke/Filter length/Swing plate分类
轻工纺织引用本文复制引用
杜坤艳,康瑛,孙斌,程卫民,张颖靓..PROTOS2-2卷接机组烟条分离轮的改进设计[J].烟草科技,2019,52(5):100-104,5.
