化工学报2019，Vol.70Issue(z2)：37-43,7.DOI:10.11949/0438-1157.20190596
混合熔融盐低温共熔区的密度计算
Densities of component salts in low-temperature eutectic region
摘要
Abstract
By establishing a theoretical model, the density of the molten salt is calculated and compared with the experimental data. The error analysis shows that the quadratic polynomial model is the best calculation method. Low-temperature eutectic region (LTER) of mixed molten salts is defined as the temperature range between the melting temperature of mixed salts and the highest melting temperature of component salts. The molten salt is a solid-liquid coexistence state in LTER, and the thermal properties cannot be directly measured. It must be obtained by a combination of theoretical research and experimental verification. Using the quadratic polynomial model, the density of the mixed molten salts in LTER is calculated by extrapolation method. The density in the whole temperature range is obtained with little error, which proves that the theoretical calculation method is feasible. In order to reduce the error in the molten salt density, the experimental data are from the same literature or the same research group.关键词
混合/模型/二元混合物/熔融盐/密度/低温共熔区Key words
mixing/ model/ binary mixture/ molten salts/ density/ low-temperature eutectic region分类
能源科技引用本文复制引用
赵庆国,冯建茹,吴玉庭,郭航..混合熔融盐低温共熔区的密度计算[J].化工学报,2019,70(z2):37-43,7.基金项目
北京市自然科学基金重点项目(3151001) （3151001）
