法医学杂志2020，Vol.36Issue(5)：648-653,6.DOI:10.12116/j.issn.1004-5619.2020.05.008
法医学同一认定中腭皱图像感兴趣区域边界标定
The Region of Interest in Boundary Calibration for Palatal Ru-gae Image of Forensic Identification
摘要
Abstract
Objective To examine the method of least-square fitting for calibrating the palatal rugae boundary. Methods According to the distribution of the teeth, the feature points were selected; when they were fit, the boundary of the palatal rugae area was created, thereby constructing a mask. The mask was used to remove the part located outside the boundary and filter out the interference. Three samples were utilized for the ex-periments and analyses to come. Results To evaluate the quantitative results of the fitting curves, the correla-tion coefficients(r)of the samples and the relationship between the actual mean value and ideal mean value was obtained through six fitting processes. The differences between the actual mean and ideal mean were found to be significantly small (from 0.2857 to 2.5000) in the six fitting processes, with the range of r close to 1(from 0.9896 to 0.9995). Conclusion The effect of the cubic polynomial fitting method adopted in this study was stable.The proposed boundary calibration method can effectively locate the palatal rugae boundary and remove the interference area, further promoting the practice of forensic identification.关键词
法医人类学/法医齿科学/腭皱/同一认定/边界标定/最小二乘拟合/感兴趣区域Key words
forensic anthropology/forensic dentistry/palatal rugae/individual identification/boundary cali-bration/least square fitting/region of interest分类
社会科学引用本文复制引用
张雄,李冰,上官宏,罗强..法医学同一认定中腭皱图像感兴趣区域边界标定[J].法医学杂志,2020,36(5):648-653,6.基金项目
This research was supported by Shanxi Province Science Foundation for Youths(201701D221106),Tai-yuan University of Science and Technology Doctoral Promoter(20162044),The International Coopera-tion Project of Science and Technology Department of Shanxi Province(201803D421),Scientific and Technological Innovation Team of Shanxi Province(201705D131025),Collaborative Innovation Center of Internet+3D Printing in Shanxi Province(201708). （201701D221106）
