| 注册
首页|期刊导航|光学精密工程|激光差动共焦透镜中心偏的自动测量

激光差动共焦透镜中心偏的自动测量

王伟 杜卓 程然 赵维谦 王允 邱丽荣

光学精密工程2023,Vol.31Issue(23):3405-3413,9.
光学精密工程2023,Vol.31Issue(23):3405-3413,9.DOI:10.37188/OPE.20233123.3405

激光差动共焦透镜中心偏的自动测量

Automatic measurement of center deviation of lens of laser differential confocal

王伟 1杜卓 1程然 1赵维谦 1王允 1邱丽荣1

作者信息

  • 1. 北京理工大学 光电学院 复杂环境智能感测技术工信部重点实验室,北京 100081
  • 折叠

摘要

Abstract

To address the problems of low measurement accuracy and significant human interference in lens position adjustment in existing center deviation measurement methods,this paper proposes an auto-matic measurement method for the center deviation of differential confocal lenses.This method uses differ-ential confocal focusing technology to precisely locate the cat's eye and confocal points of the measured lens,based on the fact that the zero point of the differential confocal axial light intensity response curve cor-responds precisely to the characteristic point of the measured lens.The high-precision air-bearing rotating shaft drives the rotation of the measured mirror,while the displacement sensor records the position infor-mation of the measured mirror.In combination with the five-dimensional posture automatic adjustment mechanism,the high-precision correction of the attitude deviation of the measured mirror was realized,the eccentricity error was eliminated,and the measurement accuracy was improved.Finally,a laser differen-tial confocal lens center deviation measurement system was established,which automatically measured the lens center deviation with high precision.The experimental results show that the measurement accuracy of the lens eccentricity can reach 0.41%,while the measurement repeatability is greater than 100 nm.Com-pared with the existing manual single measurement method,the proposed method has good repeatability,small random error,and high measurement accuracy.It serves as a new technical approach for the auto-matic measurement of lens eccentricity with high precision.

关键词

激光测量/差动共焦/中心偏/自动调整/自动测量/姿态偏差

Key words

laser measurement/differential confocal/centrality deviation/automatic adjustment/auto-matic measurement/position deviation

分类

电子信息工程

引用本文复制引用

王伟,杜卓,程然,赵维谦,王允,邱丽荣..激光差动共焦透镜中心偏的自动测量[J].光学精密工程,2023,31(23):3405-3413,9.

基金项目

中央高校基本科研业务费专项资金资助项目(No.2023CX01006) (No.2023CX01006)

民用航天技术预先研究项目(No.D020402) (No.D020402)

国家自然科学基金杰出青年基金资助项目(No.51825501) (No.51825501)

光学精密工程

OACSCD

1004-924X

访问量0
|
下载量0
段落导航相关论文