流体机械2023，Vol.51Issue(11)：22-28,7.DOI:10.3969/j.issn.1005-0329.2023.11.004
高镍三元前驱体洗涤过滤一体机搅拌装置设计
Design of agitator for washing and filtering integrated machine for high nickel ternary precursor
摘要
Abstract
In order to improve the washing effect of lithium-ion high nickel ternary precursor products,taking the process data of a certain high nickel ternary precursor as an example,the structure and parameters of the stirring device were designed.Through analysis,it was found that there is a low flow velocity in the axial center area of the double layer inclined impeller,which affects the washing effect of the product.It is needed to improve the structure of the lower layer impeller,and then a combined impeller was proposed.The influence of the installation position of the stirring impeller on the stirring effect and flow dead zones was studied.The results show that the mixing intensity of combined impeller is enhanced somewhat compared to that of the double-layer inclined impeller,and the material deposition problem is improved;after the installation position of the mixing impeller is increased,the turbulent area and intensity are significantly reduced,which is not conducive to material washing.Through practical application,the sodium content of precursor material was reduced to 0.015%,and the sulfur content was reduced to 0.14%,thus the washing effect was promoted.关键词
搅拌装置/洗涤过滤一体机/高镍三元前驱体Key words
agitator/washing and filtering integrated machine/high nickel ternary precursor分类
机械制造引用本文复制引用
张德友,朱碧肖,陈崔龙,李传祥..高镍三元前驱体洗涤过滤一体机搅拌装置设计[J].流体机械,2023,51(11):22-28,7.基金项目
安徽省科技重大专项项目(202003a05020010) （202003a05020010）
