流体机械2023，Vol.51Issue(11)：36-42,50,8.DOI:10.3969/j.issn.1005-0329.2023.11.006
基于SolidWorks平台的凸轮泵转子型线设计软件开发
Software development for lobe pump rotor profile design based on SolidWorks platform
摘要
Abstract
In order to improve the efficiency and accuracy of the design of lobe pump rotor,theoretical analysis of the profile parameters of lobe pump rotor was carried out,and the parametric equations among the parameters were established.On this basis,the authors developed the parametric design software of lobe pump rotor profile based on SolidWorks platform and C#programming language in Visual Studio 2017 environment.The main interface of the software integrates input,calculation and output buttons,and the rotor parameters can be calculated and designed by entering specific working parameters.The software also provides the selection of rotor types such as multi-lobe,straight lobe and spiral,which shortens the calculation cycle and improves the design efficiency.Through numerical simulation and experimental verification,the flow curves at different differential pressures and different speeds were compared,and the design results of the software were within 5%and 3.0%of the numerical and experimental results,respectively.The research realizes the rapid design of lobe pump,which has certain significance for the secondary development of similar products.关键词
凸轮泵转子/参数化设计/SolidWorks/软件开发Key words
lobe pump rotor/parametric design/SolidWorks/software development分类
机械制造引用本文复制引用
张柯,黎义斌,井卫民,张志宇..基于SolidWorks平台的凸轮泵转子型线设计软件开发[J].流体机械,2023,51(11):36-42,50,8.基金项目
甘肃省自然科学基金项目(20JR5RA452) （20JR5RA452）
