| 注册
首页|期刊导航|烟草科技|电加热卷烟传热与原料组分变化的数值模拟

电加热卷烟传热与原料组分变化的数值模拟

高峄涵 黄洁洁 王雨青 吴晋禄 蒋旭 高洁 高乃平

烟草科技2023,Vol.56Issue(12):67-75,9.
烟草科技2023,Vol.56Issue(12):67-75,9.DOI:10.16135/j.issn1002-0861.2022.0801

电加热卷烟传热与原料组分变化的数值模拟

Numerical simulation of heat transfer and main aerosol constituents released from electrically heated tobacco products

高峄涵 1黄洁洁 2王雨青 1吴晋禄 2蒋旭 1高洁 1高乃平2

作者信息

  • 1. 上海新型烟草制品研究院,上海市浦东新区秀浦路3733号 201315
  • 2. 同济大学机械与能源工程学院,上海市四平路1239号 200092
  • 折叠

摘要

Abstract

To develop a numerical model to describe the dynamic heat transfer process and release of major aerosol constituents from the tobacco section of electrically heated tobacco products,the porous medium theory and tobacco reaction kinetics were combined to study heat transfer,aerosol generation and transfer,and the release behavior of moisture,glycerol,and nicotine from the tobacco section during heating.The model was solved numerically using Fluent computational fluid dynamics software.Based on the heat transfer similarity criterion for the porous media,an experimental sleeve device with a 4-fold scaled-up of the prototype tobacco stick was designed and built,and the temperature distribution within the sleeve device was measured.The predictive ability of the model was validated with the measured temperature data and tested puff-by-puff residuals of the three major constituents in the prototype tobacco stick.The results showed that the simulated values were in good agreement with the experimental values;the average errors of the simulated values by the model for the puff-by-puff residuals of moisture,glycerol,and nicotine in the tobacco section were 5.02%,12.41%,and 19.97%,respectively.The model can be used to evaluate the heat transfer within the tobacco section,the temperature of 76.51%volume fraction of the tobacco materials was below 150℃in this simulation study,and the low temperature affected the release rates of glycerol and nicotine.This numerical model can be used to optimize the design of heating and formulation of tobacco constituents for heated tobacco products.

关键词

电加热卷烟/扩尺实验装置/温度分布/发烟段/组分释放/数值模拟

Key words

Electrically heated tobacco product/Scaled-up experimental device/Temperature distribution/Tobacco section/Component release/Numerical simulation

分类

轻工纺织

引用本文复制引用

高峄涵,黄洁洁,王雨青,吴晋禄,蒋旭,高洁,高乃平..电加热卷烟传热与原料组分变化的数值模拟[J].烟草科技,2023,56(12):67-75,9.

基金项目

国家烟草专卖局新型卷烟研制重大专项项目"加热卷烟专用再造烟叶配方适用性研究及应用"[110202101019(XX-05)] (XX-05)

上海新型烟草制品研究院有限公司科技项目"电加热卷烟关键成分释放规律及热动力学研究"(KF2020-001J). (KF2020-001J)

烟草科技

OA北大核心CSCDCSTPCD

1002-0861

访问量1
|
下载量0
段落导航相关论文