烟草科技2023，Vol.56Issue(12)：84-90,7.DOI:10.16135/j.issn1002-0861.2023.0081
YJ27型加热卷烟接装机双路供料系统的设计
Design of dual-track feeding system for heated tobacco product assembling machine YJ27
摘要
Abstract
Tobacco rod jam or broken in the feeding system of heated tobacco product(HTP)assembling machine YJ27 tends to cause machine shutdowns,by analyzing the feeding system,it was found that the excessively high tobacco rod picking speed of the transfer drum was the main cause of the malfunction.A dual-track feeding system was designed based on the original system.The picking speed was slowed down by simultaneously picking tobacco rods through a pair of pick-up drums.The parameters and corresponding gears of the pick-up drum,transfer drum,combining drum,and accelerating drum in the feeding system were redesigned to synchronize the dual-track feeding system with the main machine.The redesigned system was tested on"MC"brand HTPs at Yuxi Cigarette Factory.The results showed that the operating efficiency of the machine increased from 72.90％ to 90.55％,and the proportion of unqualified HTPs decreased from 11.69％ to 1.37％.The number of machine shutdowns caused by the tobacco rod jam or broken in the feeding system was reduced to zero.This technology supports the promotion of operating efficiency of HTP production and the reduction of tobacco and material consumption.关键词
YJ27型接装机/加热卷烟/供料系统/取烟轮/加速轮/传动比Key words
YJ27 assembling machine/Heated tobacco product/Feeding system/Pick-up drum/Accelerating drum/Transmission ratio分类
轻工纺织引用本文复制引用
杨成波,张凌,王俊,覃志宏,雷斌,王清平,潘永华,赵燕..YJ27型加热卷烟接装机双路供料系统的设计[J].烟草科技,2023,56(12):84-90,7.基金项目
云南中烟工业有限责任公司重点科技项目"基于传统卷烟工艺的加热卷烟产业化关键技术研究及应用"(2021GY05). （2021GY05）
