宇航材料工艺2023，Vol.53Issue(6)：98-102,5.DOI:10.12044/j.issn.1007-2330.2023.06.016
成型压力对EPDM绝热层性能影响研究
Study on the Influence of Molding Pressure on the Performance of Ethylene Propylene Diene Monomer(EPDM)Insulation
凌玲 1严文聪 2隋琦 1陈雯 1任雯君1
作者信息
- 1. 湖北航天化学技术研究所,襄阳 441003
- 2. 西安航天复合材料研究所,西安 710025
- 折叠
摘要
Abstract
In order to reduce the molding defects of composite shell and optimize the winding process,the change of internal porosity of EPDM insulation under lower vulcanization molding pressures was observed by microscope.Influence of vulcanization molding pressure on the body performance and interface bonding performance of EPDM insulation was studied.The results show that,when the vulcanization molding pressure is less than 0.15 MPa,there are more pores in the insulation after vulcanization with lower density,mechanical properties and ablative properties.With the increase of molding pressure,insulation porosity gradually decreases.Insulation performance and interface bonding reach a high stable value to meet the requirements of use.关键词
EPDM绝热层/性能/成型压力Key words
EPDM insulation/Performance/Forming pressure分类
航空航天引用本文复制引用
凌玲,严文聪,隋琦,陈雯,任雯君..成型压力对EPDM绝热层性能影响研究[J].宇航材料工艺,2023,53(6):98-102,5.
