中国造纸2023，Vol.42Issue(11)：103-108,6.DOI:10.11980/j.issn.0254-508X.2023.11.014
环境相对湿度对加热卷烟芯材及烟支物理特性的研究
Study on the Core Material and Cigarette's Physical Properties of Heated Cigarette by Ambient Related Humidity
王鹏飞 1周成喜 1罗亮 1朱鲜艳 1张晓艳 1朱远洋 1徐瑞霜 1李朝建2
作者信息
- 1. 南通烟滤嘴有限责任公司,江苏南通,226014
- 2. 江苏中烟工业有限责任公司技术中心,江苏南京,210019
- 折叠
摘要
Abstract
Reconstituted tobacco produced by spraying process and slurry process,and cigarette produced by the reconstituted tobacco were taken as the research objects in this study.The research was carried out on tensile strength and bursting degree of reconstituted tobacco,ciga-rette resistance and smoke temperature.The results showed that with the increase of ambient related humidity from 40％to 80％,the moisture content of reconstituted tobacco increased,the tensile strength decreased and the bursting degree decreased.Influenced by the distribution of fi-ber and smoke powder in reconstituted tobacco,the effects of ambient related humidity on the tensile strength and break resistance of the two re-constituted tobacco were significantly different.There was a positive correlation between cigarette resistance,smoke temperature and ambient related humidity,the maximum suction resistance of cigarette produced by slurry process could reach 1766 Pa,and the maximum suction tem-perature of cigarette could reach 72.3 ℃.When the ambient related humidity increased from 40％to 50％,the moisture content of reconstitut-ed tobacco and the cigarette resistance changed slightly.In order to ensure the quality stability of core material and the smoking experience,the production and storage related humidity of the two kinds of reconstituted tobacco and cigarette should be lower than 50％at(23±1)℃.关键词
环境相对湿度/喷涂法/稠浆法/加热卷烟/烟草薄片Key words
ambient related humidity/spraying process/slurry process/heated cigarette/reconstituted tobacco分类
轻工纺织引用本文复制引用
王鹏飞,周成喜,罗亮,朱鲜艳,张晓艳,朱远洋,徐瑞霜,李朝建..环境相对湿度对加热卷烟芯材及烟支物理特性的研究[J].中国造纸,2023,42(11):103-108,6.
