现代农业装备2023，Vol.44Issue(6)：38-43,93,7.
小型柱塞式生物质成型机设计及试验
Design and Experiment of Small Biomass Molding Machine
摘要
Abstract
In order to solve the problem of environmental pollution caused by discarded pecan bushes and turn them into clean energy that can be recycled,a small plunger type biomass forming machine was designed to turn discarded pecan bushes into a treasure and make biomass pellet forming fuel.Using the controlled variable method,conversion method,the optimum molding process parameters were determined through experimental studies comparing the relaxation density of the resulting molding fuel under different conditions of material size,molding mold aspect ratio,molding temperature,and moisture content of raw materials.The experimental results showed that its higher content of lignin cellulose was beneficial to the formation of biomass pellets,and the best particle size quality and highest density of pecan fruit bushes fuel were processed and molded at a material size of 3 mm,a molding temperature of 110℃,a mold aspect ratio of 3∶1,and a raw material moisture content of 16%.The designed home plunger type biomass forming machine can make pecan fruit bushes into pellet type biomass forming fuel,which not only can improve the utilization rate of agricultural and forestry waste,but also can reduce environmental pollution and contribute to the national goal of carbon peaking and carbon neutrality.关键词
核桃蒲壳/生物质成型机/生物质成型燃料/含水率Key words
walnut putshell/biomass molding machine/biomass molding fuel(BMF)/water content分类
农业工程引用本文复制引用
陈硕千,许小锋,张林超..小型柱塞式生物质成型机设计及试验[J].现代农业装备,2023,44(6):38-43,93,7.基金项目
浙江省公益技术研究计划/农村农业项目(LGN21C160006) （LGN21C160006）
浙江农林大学2022年校级学生科研训练项目(S202210341015) （S202210341015）
浙江农林大学2021年校级学生科研训练项目(2021KX0168) （2021KX0168）
