河北水利电力学院学报2023，Vol.33Issue(4)：38-41,47,5.DOI:10.16046/j.cnki.issn2096-5680.2023.04.007
单回路T接角钢塔在110kV输电线路设计中的应用
Application of Single-circuit T Angle Steel Tower in 110kV Transmission Line Design
摘要
Abstract
Combining with practical engineering,this article introduces the application effect of using single circuit tension angle steel towers for T connection of transmission lines in the design of 110kV overhead transmission lines.Another set of wire cross arms were added vertically below the lower side of the wire cross arm of the ordinary single circuit"干"shaped ten-sion angle steel tower,and a"cross"arrangement was formed.By adding a set of wire cross arms,the T-connection problem in overhead transmission lines was achieved on a single circuit tension angle steel tow-er.During the T-connection process of transmission lines,the wires are always arranged in a triangular pattern,and the force acting on the angle steel tower structure is more reasonable.By selecting the T con-nection method of the transmission line reasonably,the design scheme is made more reasonable.While sig-nificantly saving the land occupied by the angle steel tower,the corresponding engineering economic and technical indicators are better,and the power outage time of the transmission line is shorter,making con-struction operations more convenient.关键词
110kV输电线路/单回路角钢塔/T接Key words
110kV transmission line/single circuit/T connection分类
信息技术与安全科学引用本文复制引用
李乾飞,马丽..单回路T接角钢塔在110kV输电线路设计中的应用[J].河北水利电力学院学报,2023,33(4):38-41,47,5.基金项目
河北水利电力学院2022年度基本科研业务费研究项目(SYKY2215) （SYKY2215）
