河北水利电力学院学报2023，Vol.33Issue(4)：58-63,6.DOI:10.16046/j.cnki.issn2096-5680.2023.04.011
基于振动时效工艺的正交异性钢桥面板残余应力调控
Residual Stress Control of Orthotropic Steel Bridge Deck Based on Vibration Stress Relief Technology
摘要
Abstract
To minimize the welding residual stress in orthotropic steel bridge deck,and to assess the effectiveness of vibratory stress relief(VSR)applied in bridge steel structures,a full-scale model of ortho-tropic steel bridge deck was manufactured and its welding residual stresses were adjusted by using VSR.Thereafter,the welding residual stresses were measured by the blind-hole method to evaluate the effects of the procedure.The results show that the magnitudes of welding residual stress in the weld zone are signifi-cantly high,which are up to or higher than the material yield strength.After vibrating,the welding resid-ual stresses have been reduced to below the material yield strength both in the weld zone on the deck plate and in the area on the weld surface.In addition,the residual stress field has become more uniform.If the stress level is much higher,the effect of VSR would be much better.After vibrating,the welding residual stresses in the area away from the weld are slightly increased,but still remain at a relatively low level.It is suggested to apply the VSR technology to adjust welding residual stresses for bridge steel structures.关键词
振动时效/正交异性钢桥面板/焊接残余应力/盲孔法Key words
vibratory stress relief/orthotropic steel bridge deck/welding residual stress/blind-hole method分类
交通工程引用本文复制引用
陈利..基于振动时效工艺的正交异性钢桥面板残余应力调控[J].河北水利电力学院学报,2023,33(4):58-63,6.基金项目
中国铁建股份有限公司科技研究开发计划项目(15-C22) （15-C22）
中铁十八局集团有限公司科技研究开发计划及资助计划项目(G21-05) （G21-05）
