煤炭与化工2023，Vol.46Issue(11)：29-32,4.DOI:10.19286/j.cnki.cci.2023.11.007
不同长度工作面的支承压力规律与超前支护研究
Research on the law of abutment pressure and advance support in working faces with different lengths
张宁1
作者信息
- 1. 山西焦煤霍州煤电集团有限公司辛置矿,山西霍州 031400
- 折叠
摘要
Abstract
No.615 irregular working face in Liyazhuang Mine consists of two blocks with different inclined lengths:a block with a length of 110 m and a block with a length of 210 m.Based on the actual situation of the site,a numerical model was established for analysis,and it was concluded that the advance abutment pressure of the two working faces showed the distribution characteristics of"small in the middle and large in both sides",the length of the working face increased,the width of the advance stress concentration area increased and the maximum stress coefficient increased.The advance support distance of the gateway of the two working faces should be 20 m and 25 m,and both were in the stress peak area within the first 15 m,which was the key support area.At the same time,a single hydraulic prop combined with metal π-beam or advanced support was proposed to strengthen the super-front suppor,which realized the stability control of the surrounding rock of the advance section of the working face with different lengths during the mining period.关键词
不规则工作面/数值模拟/支承压力/超前支护Key words
irregular working face/numerical simulation/abutment pressure/advance support分类
矿业与冶金引用本文复制引用
张宁..不同长度工作面的支承压力规律与超前支护研究[J].煤炭与化工,2023,46(11):29-32,4.
