家电科技Issue(z1)：131-135,5.DOI:10.19784/j.cnki.issn1672-0172.2023.99.031
温度载荷下的格栅变形分析及其结构设计
Deformation analysis and structural design of grid under temperature load
徐兴东 1陈楷1
作者信息
- 1. 珠海格力电器股份有限公司 广东珠海 519070
- 折叠
摘要
Abstract
The air conditioning outlet grille is mainly used to protect the safety of users and cannot have a significant impact on the performance of the air conditioning.However,under heating conditions,the grid ribs will expand due to heat,causing the ribs to bend and deform,seriously affecting the appearance of the air conditioner,and also creating safety hazards.In response to this issue,a mathematical model of the grid under heating conditions was established,and the stability of the grid was analyzed.At the same time,various solutions to deformation problems were compared and analyzed,and the optimal solution was finally given.A universal formula for designing the grid was proposed.To verify the feasibility of the scheme,hand board experiments were conducted,and noise and air output were tested and compared.The results showed that the scheme is not only economical,but also can effectively solve the problem of grid deformation without affecting the performance of noise and air volume.关键词
格栅设计/温度/变形/数学模型Key words
Grille design/Temperature/Deformation/Mathematical model分类
机械制造引用本文复制引用
徐兴东,陈楷..温度载荷下的格栅变形分析及其结构设计[J].家电科技,2023,(z1):131-135,5.
