家电科技Issue(z1)：361-365,5.DOI:10.19784/j.cnki.issn1672-0172.2023.99.082
透明装饰塑件气泡质量缺陷分析与改善
Analysis and improvement of bubble quality defects of transparent decorative plastic parts
王月1
作者信息
- 1. 青岛海尔空调器有限总公司 山东青岛 266000||数字化家电国家重点实验室 山东青岛 266000
- 折叠
摘要
Abstract
Based on the bubble defects of transparent injection molding products,the analysis,simulation and verification were carried out in combination with specific products in combination with the types of defects,the causes of formation,the optimization direction,the optimization measures,and the improvement effect.From the four dimensions of product,material,mold and injection molding process,certain bubble defect improvement measures were obtained,and certain technical accumulation was carried out for the subsequent design and development of such products.关键词
透明产品/气泡/注塑成型/仿真分析Key words
Transparent product/Bubble/Injection molding/Simulation analysis引用本文复制引用
王月..透明装饰塑件气泡质量缺陷分析与改善[J].家电科技,2023,(z1):361-365,5.
