铜业工程Issue(6)：80-88,9.DOI:10.3969/j.issn.1009-3842.2023.06.009
搅拌摩擦焊用钨铼合金的研究进展
Research Progress on Tungsten-Rhenium Alloy for Friction Stir Welding
李诵斌 1易锦伟 1习瑶瑶 1吴俊杰 1谌日葵 1李雄斌 1冯永山 1李阁平2
作者信息
- 1. 江西铜业技术研究院有限公司,江西 南昌 330096
- 2. 江西铜业技术研究院有限公司,江西 南昌 330096||中国科学院金属研究所,辽宁 沈阳 110055
- 折叠
摘要
Abstract
Friction Stir Welding(FSW),as an environmentally friendly,cost-effective solid-state joining technique,has been widely ap-plied in the fields of aerospace,rail transportation and new energy vehicles.However,when it comes to the FSW of high-melting-point alloy materials like titanium alloys and stainless steels,the choice of the tool material becomes a major limiting factor.Tungsten-rhenium(W-Re)alloy,with its high melting point,high hardness and corrosion resistance,has emerged as the most promising tool material for FSW of high-melting-point alloys.This review article summarizes the research progress in the preparation methods,composite reinforce-ment techniques,and application scenarios of W-Re alloy tool materials for FSW in recent years.Additionally,it provides an outlook on expanding the applications of W-Re alloy in the field of FSW,including efforts to reduce production costs and enhance its service life.The aim is to promote further application and development of W-Re alloy tool materials in the field of FSW.关键词
搅拌摩擦焊/W-Re合金/制备工艺/复合强化/应用场景Key words
friction stir welding/tungsten-rhenium alloy/preparation process/composite reinforcement/application scenarios分类
矿业与冶金引用本文复制引用
李诵斌,易锦伟,习瑶瑶,吴俊杰,谌日葵,李雄斌,冯永山,李阁平..搅拌摩擦焊用钨铼合金的研究进展[J].铜业工程,2023,(6):80-88,9.
