| 注册
首页|期刊导航|物理化学学报|基于固态电解质的熔融碱金属电池研究进展

基于固态电解质的熔融碱金属电池研究进展

王匡宇 刘凯 伍晖

物理化学学报2023,Vol.39Issue(12):1-14,14.
物理化学学报2023,Vol.39Issue(12):1-14,14.DOI:10.3866/PKU.WHXB202301009

基于固态电解质的熔融碱金属电池研究进展

Molten Alkali Metal Batteries Based on Solid Electrolytes

王匡宇 1刘凯 2伍晖1

作者信息

  • 1. 清华大学材料学院,新型陶瓷与精细工艺国家重点实验室,北京 100084
  • 2. 华北电力大学新能源学院,新能源电力系统国家重点实验室,北京 102206
  • 折叠

摘要

Abstract

The development of energy storage technologies with high safety,low cost,and high energy densities is essential for the widespread use of renewable energy sources.Battery technology is one of the most promising candidates because of its pollution-free operation,high round-trip efficiency,flexible power and energy characteristics,long cycle life,and low maintenance cost.Although most batteries operate at room temperature,high-temperature systems are expected to perform better owing to improved electrolyte conductivity,faster reaction kinetics,and reduced interface impedance.The reported high-temperature batteries can be classified into liquid and solid electrolyte-based systems,with the latter having the potential to achieve higher energy densities while avoiding self-discharge effects.This review summarizes solid electrolyte-based liquid sodium and lithium batteries(SELS and SELL batteries).SELS batteries primarily use beta-Al2O3 and NASICON electrolytes,while SELL battery systems use garnet electrolytes.Because the microstructures and compositions of ceramic electrolytes significantly affect their conductivity and stability,novel manufacturing and element doping methods are being intensively investigated.Surface modification technology is also a major research focus to improve the wetting properties of molten alkali metals on the ceramic electrolyte,which assists to decrease interfacial resistance and increase the rate performance and power density of the battery.In addition,the selection of the cathode materials of SELS and SELL batteries has a significant impact on the energy and power densities,cycling stability,material cost,and application scenarios of the real devices.Until now,lead alloys,metal chlorides,sulfur,selenium,and iodine have been reported as potential choices.We describe in detail the reaction mechanisms,existing problems,and the latest research progress of these battery systems,with their electrochemical performance and raw material costs systematically summarized and compared.It is worth noting that the SELS and SELL batteries have different levels of technological maturity.In 2019,an energy storage system using SELS batteries with a capacity of 108 MW/648 MWh was built,whereas SELL battery research is a relatively emerging field.However,SELL batteries demonstrate promising application prospects because of their higher energy densities,lower operating temperatures,and competitive raw material costs.In addition,we believe that several research advancements and technical achievements related to these two types of batteries can be shared,with the future research directions listed in the conclusion section.

关键词

高温电池/固态电解质/电网储能/beta-氧化铝电解质/NASICON电解质/石榴石型电解质

Key words

High-temperature battery/Solid electrolyte/Grid-scale energy storage/beta-Al2O3 electrolyte/NASICON electrolyte/Garnet electrolyte

分类

化学

引用本文复制引用

王匡宇,刘凯,伍晖..基于固态电解质的熔融碱金属电池研究进展[J].物理化学学报,2023,39(12):1-14,14.

基金项目

The project was supported by the National Natural Science Foundation of China(51788104)and the Beijing Natural Science Foundation(JQ19005).国家自然科学基金(51788104)和北京市自然科学基金(JQ19005)资助项目 (51788104)

物理化学学报

OACSCDCSTPCD

1000-6818

访问量0
|
下载量0
段落导航相关论文