| 注册
首页|期刊导航|西南交通大学学报|I2控制单电感双输出Buck LED驱动电源交叉影响分析

I2控制单电感双输出Buck LED驱动电源交叉影响分析

王瑶 陈玲 杨德鑫 徐利梅

西南交通大学学报2023,Vol.58Issue(6):1248-1256,9.
西南交通大学学报2023,Vol.58Issue(6):1248-1256,9.DOI:10.3969/j.issn.0258-2724.20220383

I2控制单电感双输出Buck LED驱动电源交叉影响分析

Cross Regulation Analysis of I2-Controlled Single-Inductor Dual-Output Buck LED Driver

王瑶 1陈玲 2杨德鑫 1徐利梅1

作者信息

  • 1. 西南民族大学电气工程学院,四川 成都 610041
  • 2. 重庆工业职业技术学院电子与物联网工程学院,重庆 401120
  • 折叠

摘要

Abstract

The single-inductor dual-output(SIDO)Buck LED driver has two output branches,namely LED1 and LED2.Between these two output branches,there is cross regulation.In order to reduce the output cross regulation of a SIDO Buck LED driver operating in continuous conduction mode(CCM)of the inductive current,the current-current(I2)-controlled SIDO Buck LED driver was proposed.The operating principle and switch modes of the SIDO Buck LED driver were analyzed,and its state space average model and small signal model were established with the state space averaging method.Then,the circuit structure and operating principle of the I2-controlled SIDO Buck LED driver were analyzed.Based on inductive current ripple and output current ripple,the small signal expressions of duty cycle and cross regulation transfer functions were obtained.The Bode plots of the cross regulation transfer functions were employed to analyze the cross regulation compared with the output branches of the voltage-controlled SIDO Buck LED driver.The study results show that when the reference signal of LED1 of the voltage-controlled SIDO Buck LED driver steps down from 1.6 V to 0.8 V and 2.4 V to 1.2 V respectively,the cross regulation between LED1 and LED2 is 0.250 A and 0.365 A,and that of the I2-controlled SIDO Buck LED driver is 0.09 A and 0.115 A.When the reference signal of LED2 steps down from 3.2 V to 1.6 V and 2.4 V to 1.2 V respectively,the cross regulation between LED2 and LED1 is 0.06 A and 0.04 A,and that of I2-controlled SIDO Buck LED driver is 0.03 A and 0.015 A.It illustrates that the cross regulation between output branches of the I2-controlled SIDO Buck LED driver has been reduced compared with that of the voltage-controlled SIDO Buck LED driver.

关键词

单电感双输出/Buck LED驱动电源/小信号模型/交叉影响/I2控制

Key words

single-inductor dual-output(SIDO)/Buck LED driver/small signal model/cross regulation/I2-controlled

分类

电子信息工程

引用本文复制引用

王瑶,陈玲,杨德鑫,徐利梅..I2控制单电感双输出Buck LED驱动电源交叉影响分析[J].西南交通大学学报,2023,58(6):1248-1256,9.

基金项目

四川省自然科学基金(2022NSFSC1913) (2022NSFSC1913)

中央高校基本科研业务费专项资金(ZYN2022027) (ZYN2022027)

西南交通大学学报

OACSCDCSTPCD

0258-2724

访问量0
|
下载量0
段落导航相关论文