云南水力发电2023，Vol.39Issue(12)：363-368,6.DOI:10.3969/j.issn.1006-3951.2023.12.078
某大型浮船泵站设计及优化
Design and Optimization of a Large Floating Ship Pump Station
张辉 1张帆 2杨永信 1徐瑞红 3徐顶娥 1贺朋朋 1周礼斌1
作者信息
- 1. 中国电建集团昆明勘测设计研究院有限公司,云南 昆明 650051
- 2. 江苏大学,江苏 镇江 212000
- 3. 昆明电机厂有限责任公司,云南 昆明 650100
- 折叠
摘要
Abstract
A certain floating boat pump station has technical characteristics such as large pump flow rate,high head,large size of equipped pumps and motors,large size of pump boat,high pressure of rocker arm joints,and deep floating boat shape.This article introduces the design of the floating boat pump station,mainly including the layout of the pump station,the number and main parameters of the water pumps,and the parameters of the floating boat.The formula for the manufacturing difficulty coefficient of the rocker arm joint device is proposed for the first time.Through the analysis of the technical characteristics of this project,the optimization ideas and research directions for the next stage are provided.At the same time,the key to optimization,such as the development of efficient and good anti cavitation water pumps,theoretical calculations,and model development methods,are discussed.关键词
大型浮船泵站/水泵汽蚀余量/摇臂接头/下承式布置Key words
large floating ship pump station/water pump cavitation margin/rocker arm joint/pipe-jacking/underpass layout分类
建筑与水利引用本文复制引用
张辉,张帆,杨永信,徐瑞红,徐顶娥,贺朋朋,周礼斌..某大型浮船泵站设计及优化[J].云南水力发电,2023,39(12):363-368,6.
