中国机械工程2023，Vol.34Issue(24)：2927-2935,9.DOI:10.3969/j.issn.1004-132X.2023.24.004
基于标称齿轮当量载荷的聚合物齿轮齿面承载能力评价方法
An Evaluation Method for Tooth Surface Load Capacity of Polymer Gears Based on Nominal Gear Equivalent Load
摘要
Abstract
The current evaluation methods for the tooth surface load capacity of polymer gears still rely on the methods for metal gears,which did not comprehensively consider the influences of material type,lubrication condition and stress of the polymer gears.This would lead to significant re-liance on engineering experience for material selection,strength design and loading capacity evaluation in practical engineering applications.Therefore,a polymer gear tooth surface load capacity evaluation method was proposed based on the nominal gear equivalent load.Over 169 sets of data and more than 6000 hours of durability tests on polymer gears were obtained,considering different lubrication condi-tions,gear materials,and machining methods.The results show that oil lubrication may significantly improve the tooth surface load capacity of plastic gears,and the tooth surface load capacity of PEEK(polyether ether ketone)gears is more than 30％higher than that of POM(polyoxymethylene)and PA66(polyamide)gears under oil lubrication,which provides an evaluation method and basic data support for active design and transmission power applications of polymer gears.关键词
聚合物齿轮/当量载荷/承载能力/评价方法Key words
polymer gear/equivalent load/load capacity/evaluation method分类
机械制造引用本文复制引用
胡新磊,刘怀举,魏沛堂,卢泽华,廖常军,朱加赞..基于标称齿轮当量载荷的聚合物齿轮齿面承载能力评价方法[J].中国机械工程,2023,34(24):2927-2935,9.基金项目
国家自然科学基金(52175041,52322504) （52175041,52322504）
