铸造2023，Vol.72Issue(12)：1619-1623,5.
基于田口法的铝合金空心控制臂低压铸造工艺优化
Optimization of Low Pressure Die Casting Process for Aluminum Alloy Hollow Control Arm Based on Taguchi Method
黄庆 1苏小平1
作者信息
- 1. 南京工业大学机械与动力工程学院,江苏南京 211816
- 折叠
摘要
Abstract
In order to optimize the process parameters of hollow control arm of A356 aluminum alloy in low pressure diecasting,the solidification time,shrinkage pore volumeand secondary dendrite arm spacing were used as evaluation indexes by Taguchi method.The effects of temperature parameters and time parameters on the forming quality and mechanical properties of thecastings were analyzed by means of mean and range analysis and variance analysis.The results showed that the preheating temperature and filling time had significant effects on the mechanical properties and production efficiency of the castings.关键词
低压铸造/A356铝合金/空心控制臂/田口法Key words
low pressure die casting/A356 aluminum alloy/hollow control arm/taguchi method分类
矿业与冶金引用本文复制引用
黄庆,苏小平..基于田口法的铝合金空心控制臂低压铸造工艺优化[J].铸造,2023,72(12):1619-1623,5.
