火力与指挥控制2023，Vol.48Issue(11)：120-124,5.DOI:10.3969/j.issn.1002-0640.2023.11.018
基于改进阈值的装备动力系统故障信号去噪方法
Denoising Method of Fault Signal of Equipment Power System Based on Improved Threshold
沈延安 1杨克泉 1张君彪2
作者信息
- 1. 陆军炮兵防空兵学院,合肥 230031
- 2. 空军预警学院,武汉 430019
- 折叠
摘要
Abstract
In view of the problem that the reconstructed signal distortion and fixed deviation are easy to occur in the denoising process of the fault signal of the equipment power system,a new improved threshold denoising method is proposed.By constructing a new threshold function and a selection method improving the threshold,the advantages of soft and hard threshold denoising methods such as strong continuity,good smoothness and high degree of approximation are synthesized,the signal to noise ratio of the reconstructed signal is improved and the root mean square error of the reconstructed signal is reduced.The proposed denoising method is applied to the simulation test of the power system of unmanned aerial vehicle,and the results show that the denoising effects of this method are better,and there is certain feasibility and effectiveness.关键词
改进阈值/去噪/动力系统/故障信号Key words
improved threshold/denoising/power system/fault signal分类
通用工业技术引用本文复制引用
沈延安,杨克泉,张君彪..基于改进阈值的装备动力系统故障信号去噪方法[J].火力与指挥控制,2023,48(11):120-124,5.
