面向增材制造的双蒙皮夹层结构加筋拓扑优化方法OACSCDCSTPCD
Topology optimization of double-skin stiffened sandwich structure for additive manufacturing
双蒙皮夹层结构是航空航天装备中的特殊承力结构,其典型代表为发动机尾喷管中的同步环构件.近年来,增材制造技术为该类薄壁结构的创新型设计提供了有利条件.但增材制造有其特殊的工艺要求,基于传统拓扑优化得到的设计结果往往存在大量的悬空区域,无法直接应用于增材制造工艺.因此,需要在优化设计阶段统筹考虑结构的力学性能和自支撑工艺约束.针对上述问题,本文提出了一种面向增材制造的双蒙皮夹层薄壁结构加筋拓扑优化方法,可在一次优化中同时得到优化的加筋布局和非均匀点阵…查看全部>>
As special load-bearing structures,thin-walled sandwich structures have been widely used in aerospace equipment,such as the synchronization ring structure in an engine tail nozzle.Recently,3D printing of complex thin-walled sandwich structures can be achieved owing to the development of emerging additive manufacturing(AM)technology.However,there are still several process constraints in direct 3D printing of topologically optimized shapes in practical applica…查看全部>>
霍泽凯;王博;周演;郝鹏;徐胜利
大连理工大学工业装备结构分析国家重点实验室,大连 116024||北京机电工程研究所,北京 100074大连理工大学工业装备结构分析国家重点实验室,大连 116024大连理工大学工业装备结构分析国家重点实验室,大连 116024大连理工大学工业装备结构分析国家重点实验室,大连 116024大连理工大学工业装备结构分析国家重点实验室,大连 116024
力学
薄壁结构多层级结构拓扑优化加筋设计增材制造
thin-walled structureshierarchical structuretopology optimizationstiffener designadditive Manufacturing
《计算力学学报》 2023 (6)
861-871,11
中央高校基本科研业务费(DUT20ZD104)大连理工大学基本科研业务费(DUT2019TD37,DUT21GF201)资助项目.
评论