煤质技术2023，Vol.38Issue(6)：51-56,6.DOI:10.3969/j.issn.1007-7677.2023.06.007
捣固炼焦配合煤工艺参数对焦炭冷强度的影响研究
Study on the influence of process parameters of stamping coking blended coal on the mechanical strength of coke
摘要
Abstract
By exploring the relationship between the process parameters of Jianlong Xilin Steel stamping coking blen-ded coal and the mechanical strength of coke,the stamping coking process conditions can be optimized.While ensu-ring the stable thermal strength of coke,the optimal process parameters for improving the metallurgical coke yield can be determined and guidance can be provided for improving the coal blending process conditions.Based on the re-search scheme design of the coal quality characteristic parameters and their proportions of the blended coal used in the experiment,as well as the coking test conditions and methods,the influence of the process parameters such as blen-ded coal moisture,fineness,and bulk density on the coke mechanical strength(lump coke rate,lump coke strength,and microstrength)was studied.According to research,it can be concluded that with the increase of mois-ture content,the block coke strength and microstrength of Jianlong Xilin Steel's blended coal remain basically un-changed,while the block coke first increases and then decreases.When the moisture content is 13%,its block coke ratio reaches its maximum;as the fineness increases,the block coke strength and microstrength first increase and then decrease,while the coke block coke ratio shows a decreasing trend.When the fineness is greater than 90%,the block coke ratio decreases significantly.As the bulk density of the blended coal increases,the block coke strength and microstrength increase,and the block coke ratio increases significantly.In order to improve coke mechanical strength,on the premise of maintaining the same proportion of blended coal and considering the trend of changes in coke mechanical strength indicators,it is more suitable to control the moisture content of blended coal at about 13%,fineness at about 90%,and coal bulk density at about 1.0 t/m3.关键词
焦炭冷强度/炼焦配合煤/工艺参数/块焦率/块焦强度/显微强度/堆密度/黏结能力Key words
mechanical strength of coke/coking blended coal/process parameters/block coke ratio/block coke strength/micro strength/bulk density/bonding ability分类
化学工程引用本文复制引用
王飞,段福彬,张昀朋..捣固炼焦配合煤工艺参数对焦炭冷强度的影响研究[J].煤质技术,2023,38(6):51-56,6.基金项目
煤炭科学技术研究院有限公司技术创新Ⅱ类基金资助项目(2022CX-Ⅱ-01) （2022CX-Ⅱ-01）
