理化检验-物理分册2023，Vol.59Issue(12)：12-15,4.DOI:10.11973/lhjy-wl202312003
低碳钢盘条轧后控冷新技术
New controlled cooling technology for low carbon steel wire rod after rolling
骆春民 1刘莹 1花艳侠 1田志鹏1
作者信息
- 1. 天津钢铁集团有限公司技术中心, 天津 300301
- 折叠
摘要
Abstract
The transformation of austenite structure and the formation of oxide scale of low carbon steel wire rod under different controlled cooling process conditions were studied by thermal simulation test.The effects of parameters such as cooling temperature and cooling rate on the microstructure of low carbon steel wire rod,the phase structure of oxide scale,the thickness of oxide scale and the total thickness of each layer were analyzed.The content of acicular ferrite and the reasonable thickness of oxide scale structure in the microstructure of low carbon steel wire rod after controlled cooling were obtained.关键词
热模拟/低碳钢盘条/控冷/氧化铁皮/针状铁素体Key words
thermal simulation/low carbon steel wire rod/controlled cooling/iron oxide scale/needle-like ferrite分类
矿业与冶金引用本文复制引用
骆春民,刘莹,花艳侠,田志鹏..低碳钢盘条轧后控冷新技术[J].理化检验-物理分册,2023,59(12):12-15,4.
